MS51976/NASM51976

Military/Aerospace Socket Set Screw - Hex Half Dog Point - Alloy, Cad Plated

FED. SUP CLASS
5305

APPROVED 6 MAR 1964 REVISED (A) 31 MAR 1972

NOMINAL SIZE

.086

.112

.138

.164

.190

.250

.3125

.375

.500

THREADS PER INCH (UNC_3A)

SOCKET WIDTH
ACROSS FLATS

NOW

.035

.050

.062

.078

.094

.125

.156

.188

.250

POINT DIAMETER

MAX
MIN

.057
.053

.075
.070

.092
.087

.109
.103

.127
.120

.156
.149

.203
.195

.250
.241

.344
.334

POINT LENGTH

MAX
MIN

.024
.020

.030
.026

.038
.032

.043
.037

.049
.041

.067
.059

.082
.074

.099
.089

.130
.120

LENGTH

TOL

DASH NUMBER

.188
.250
.312
.375
.500
.625

+.010

1*
2*

8*
9*

15*
16*
17*
18*

24*
25*
26*
27*
28*

34
35
36*
37*
38*

44
45*
46
47*

53
54
55*
56*

62
63
64*

71
72*

.750

+.020

65*

73*

(A)

Inactive for new design after 31 MAR 1972 .

MATERIAL :

ALLOY STEEL IN ACCORDANCE WITH PROCUREMENT SPECIFICATION, HAVING A ROCKWELL HARDNESS OF C45-53

PROACTIVE COATING:

CADMIUM PLATED IN ACCORDANCE WITH PROCUREMENT SPECIFICATION.

THREADS:

THE THREADS SHALLL BE IN ACCORDANCE WITH MIL-S-7742.

DIMENTIONS:

ALL DIMENTIONS ARE IN INCHES, UNLESS OTHERWISE SPECIFIED.

PART NUMBER:

THE PART NUMBER CONSISTS OF THE MS NUMBER, PLUS THE DASH NUMBER.
EXAMPLE: MS51973_1

REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATIONS FOR BID.

FOR DESIGN FEATURE PURPOSES, THIS STANDARD TAKES PRECEDENCE OVER PROCUREMENT DOCUMENTS REFERENCED HEREIN.

INTERCHANGEABILITY

(A)	Screws covered by the dash numbers given in MS51042 and MS 51044 are cancelled after 6 March 1964 and superseded by screws covered on MS51976 having same dash number. Cancelled screws may be used until existing stock are depleted. Use only the MS51976 screws for new design.

P.A WC
Order Cust
AS
82

TITLE
SETSCREW - HEXAGON SOCKET, HALF - DOG POINT,
ALLOY STEEL, CADMIUM PLATED, UNF - 3A

MILITARY STANDARD

MS 51976

PROCUREMENT SPECIFICATION
FF-S-200

SUPERSEDES MS51042, MS51044 and in part BCTX2.2, BCTX2.3, BCTX2.8, BCTX2.9, BCTX2.11 and BCTX2.14.

SHEET 1 of 1

All prints are for reference purpose only. CAM-TECH manufactures to the latest revision.

Fill Out the Form

Request for Quote