(800) 722-5525

Documents, Reference Standards and Specifications

Cam Tech Industries complies with the latest revision for the following listed standards and specifications

QUALITY MANAGEMENT SYSTEMS

  1. AS9100:2016 (Certified) Quality Management Systems.
  2. AS9100:2016 (Certified) Quality Management Systems. (Without Design)
  3. ANSI/ISO/IEC 17025 General Requirements Competence of Testing and Calibration Laboratories (Compliant).
  4. ISO 10012-1 Measurement Management Systems – Requirements for Measurement Processes and Measuring Equipment.

FEDERAL PROCUREMENT SPECIFICATION

  1. FF S 200 Set Screws: Hexagon Socket and Spline Socket,
    Headless.

DIMENSIONAL STANDARDS

  1. ASME/ANSI B18.3 Screw Dimensions.
  2. ASME/ANSI B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws.

THREADS STANDARDS

  1. ASME/ANSI B1.1 Screw Thread Standards Inch Series.
  2. ASME/ANSI B1.2 Gages and Gaging for Screw Threads.
  3. ASME/ANSI B1.3 Screw Thread Gaging Systems for Dimensional Acceptability.
  4. ASME/ANSI B1.13M Metric Screw Thread M Profile.
  5. ASME/ANSI B1.16M Gages and Gaging for Metric M Screw Threads.
  6. FED STD H28/4 Controlled Radius Root Screw Threads, UNJ.
  7. FED STD H28/6A Gages and Gaging for Unified Screw Threads, UN & UNR.
  8. FED STD H28/20A Inspection Methods for Acceptability of Screw Threads.
  9. FED STD H28/21B Metric Screw Threads.
  10. FED STD H28/22A Gages & Gaging for Metric Screws.
  11. MIL S 7742 Standard Screw Threads.
  12. SAE AS8879 UNJ Screw Threads.

STANDARDS & SPECIFICATIONS FOR METRIC SET SCREWS

  1. ISO 68-1 ISO general purpose screw threads-Basic and design profiles –PART 1  Metric screw threads
  2. ISO 68-2 ISO general purpose screw threads-Basic and design profiles —Part 2: Inch screw threads bold
  3. ISO 898-1 Mechanical properties of fasteners made of carbon steel and alloy
    Part 1 : Bolts, screws and studs with specified property classes-Coarse and fine pitch threads
  4. ISO 898-5 Mechanical properties of fasteners made of carbon steel and alloy
    Part 5: 
    Set scews and similar threaded fasteners with specified hardness classes-Coarse thread and fine pitch thread. 
  5. ISO 965-3 ISO general purpose metric screw threads- Tolerances
    Part 3: Limit deviations for screw threads
  6. ISO 3506-1 Fasteners-Mechanical properties of corrosion-resistant stainless
    Part 1:
    Bolts, screws and studs with specified grades and property classes
  7. ISO 3506-3 Mechanical properties of corrosion resistant stainless steel fasteners
    Part 3:
    Set screws and similar fasteners not under tensile stress
  8. ISO 4026 Hexagon socket set screws with flat point
  9. ISO 4027 Hexagon socket set screws with cone point
  10. ISO 4028 Hexagon socket set screws with dog point
  11. ISO 4029 Hexagon socket set screws with cup point
  12. ISO 4753 Fasteners-Ends of parts with external ISO metric threads
  13. ISO 4766 Slotted set screws with flat point
  14. ISO 7434 Slotted set screws with cone point
  15. ISO 7435 Slotted set screws with long dog point
  16. ISO 7436 Slotted set screws with cup point

HARDNESS, MICROHARDNESS AND TORQUE STANDARDS

 

  1. ASTM E3 Standard Guide for Prep. of Metallographic Specimens.
  2. ASTM E18 Standard Test Method for Rockwell Hardness and Rockwell Superficial Hardness.
  3. ASTM E92 Vicker’s Hardness and Knoop Hardness of Metallic Materials.
  4. ASTM E140 Standard Hardness Conversion Tables for Metals
  5. ASTM E384 Standard Test Method for Microindentation Hardness of Materials.
  6. ASTM F606  Standard Test Methods for Determining Mechanical Properties.
  7. ASTM F880 Stainless Screws Torsional Strength Requirements.
  8. ASTM F880M Metric Stainless Screws – Torsional Strength Requirements.
  9. ASTM F912 Alloy Screws Torsional Strength Requirements.
  10. ASTM F912M Metric Alloy Screws – Torsional Strength Requirements.
  11. ASTM F2328 / F2328M Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts.

  12.  SAE AMS2759/1 Heat Treatment of Carbon and Low-Alloy Steel Parts. Minimum Tensile Strength Below 220 ksi.

  13. SAE AMS2759/2 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi.

  14. SAE AMS2759/5 Heat Treatment Martensitic Corrosion-Resistant Steel Parts

FINISH & COATING STANDARDS

  1. AMS 2700E Passivation Treatments for Corrosion-Resistant Steel.
  2. AMS-QQ-P-416 Plating Cadmium Electrodeposited.
  3. ASTM B487 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section.

  4. ASTM B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel.

  5. ISO 4042 Fasteners-Electroplated coating systems
  6. MIL C 13924 Coating Oxide Black for Ferrous Metal.
  7. MIL STD 171 Finishing of Metal & Wood Surfaces.

MATERIAL STANDARDS

  1. ASTM A29/A29M Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements.
  2. ASTM A108 Standard Specification for Steel Bars, Carbon and Alloy, Cold Finished.
  3. ASTM A304 Standard Specification for Steel Bars, Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements.
  4. ASTM A322 Standard Specification for Steel Bars, Alloy, Standard Grade.
  5. ASTM A484A/A484M Standard Specification for Stainless Steel Bars, Billets, and Forgings.
  6. ASTM A582/A 582M Standard Specification for Free-Machining Stainless Steel Bars.

MISCELLANEOUS STANDARDS

  1. ANSI/NCSL Z540.2 U.S. Guide to the Expression of Uncertainty in Measurement.
  2. ASME/ANSI B1.30 Standard Practice for Calculating and Rounding Dimensions
  3. ASTM A342/A342M Permeability of Feebly Magnetic Materials.
  4. ASTM DS 56 Metal & Alloys in the Unified Numbering System.
  5. ASTM E29 Using Significant Digits in Test Data to Determine Conformance with Specifications.
  6. ASTM F788/F788M Surface Discontinuities of Bolts, Screws and Studs, Inch and Metric Series.
  7. ASQC Z1.4 Sampling Procedures and Tables for Inspection by Attributes.
  8. MIL-DTL-18240
  9. MIL STD 120 Gage Inspection.
  10. NASM1312 Stress Durability.

Aerospace Socket Set Screw Drawings

NAS1081 Setscrew, Self Locking
AN565 and NASM565 Setscrew-Hexagon Socket, Various Point Styles, Alloy/Stainless Steels.
MS18063 through MS51982 and NASM18063 through NASM51982 Socket Set Screws, Various Point Styles, Alloy and Stainless Steels.

Fill Out the Form

Request for Quote
Internet Marketing Solution & Design by Cazbah