Why Is Socket Set Screw Traceability So Important in the Aerospace Industries?

Verification and Controls

  • Material verification: Traceability links the screws to their specific material heat/lot, allowing engineers to verify the alloy, mechanical properties, and required material certifications.
  • Manufacturing control: It provides a complete record of the manufacturing processes, such as lot number, heat treatment, coating/plating, and complete inspection data. This is important because properties such as hardness, torque strength, corrosion resistance, and dimensional accuracy can affect performance.
  • Configuration and specification controls: Aerospace parts have very specific specification requirements: thread size, thread class, materials, finish, dimensions, and material strength. Traceability demonstrates that the correct specification and revision was supplied.
  • Non-conformance material: If a defect is discovered in one lot of set screws during inspection, the lot is automatically quarantined and locked up in a safe area to not contaminate any other lots.
  • Root-cause investigation: If a lot of screws fails inspection, Quality Control will investigate the root cause immediately.
  • Regulatory and quality-system requirements: Aerospace manufacturers operate under rigorous quality controls and airworthiness systems. Standards such as AS9100 place strong emphasis on control of purchased products, records, identification, inspection reports, and traceability.

Why Do Set Screws Matter So Much?

A socket set screw may look insignificant compared with a large structural bolt, but its function can be critical. Depending on the application, it may retain or position a component, prevent rotation, establish a precise mechanical relationship, or secure an adjustment.

For example, imagine a set screw installed in a flight control related mechanism. If the wrong material, heat treatment, thread specification, or coating were used, the screw might not have the expected strength. Traceability doesn’t prevent failure; it provides the evidence and control needed to know exactly what was installed and to take targeted action if something goes wrong.

Typical Aerospace Material Traceability Chain

Raw Material

The manufacturer starts with certified raw material, such as alloy steel, stainless steel, or another specified material.

The material certificate identifies information such as:

  • Material specification and grade
  • Heat number / melt number
  • Chemical composition
  • Mechanical properties
  • Supplier/mill
  • Applicable material standard
  • Test results

The heat number is the critical link back to the original material production batch.

Manufacturing – Part and Lot Identification

During manufacturing, the material heat and work order number need to remain with the manufactured set screws.
Manufacturing records will establish:

  • Material heat number
  • Work order
  • Part number
  • Manufacturing lot number

This is particularly important when multiple lots of visually identical set screws are being manufactured.

Special Processes – Process Traceability

If the set screw requires a process such as:

  • Heat treatment
  • Plating
  • Passivation
  • Customer-specified special processes

The records should establish which exact production lot underwent the process.

For example: Manufacturing work order # 12345 – Heat treatment work order number HT678, Material Heat Number and process specification.

This prevents one batch from inadvertently being mixed with another.

Inspection – Objective Evidence

Inspection records demonstrate that the finished screws conform to the applicable requirements.

Depending on the specification, this can include:

  • Dimensional inspection
  • Thread inspection
  • Hardness
  • Material verification
  • Surface/coating inspection
  • Special-process verification
  • Sampling or lot acceptance results

The important point is that the inspection results can be connected to the specific production lot.

Certification – Certificate of Conformance

The supplier can then issue documentation such as a Certificate of Conformance (CoC) identifying the part number, revision/specification, quantity, lot number, and other required information.

This means the customer can determine what specific lot was received in the event of a problem.

What Happens If a Problem Is Discovered?

This is where complete traceability becomes particularly valuable.

Suppose testing reveals that a particular lot of set screws was heat treated with the incorrect hardness.

Without good traceability, the manufacturer or the customer may not know exactly which lots of screws were affected.

That allows the organization to contain the specific lot rather than treating every lot as suspect.

How This Relates to AS9100

IAQG’s aerospace quality framework is built around strong product identification, configuration control, documented information, supplier control, and traceability where required by the customer/regulatory requirements.

For an aerospace fastener supplier, this generally means having a controlled system capable of answering questions such as:

  • What is this part?
    • Part number, specification, revision, etc.
  • Where did the material come from?
    • Mill/supplier and heat number.
  • What controls were used for manufacturing?
    • Work order, manufacturing lot number, processes, inspection, and associated records.

What Happens After Manufacturing?

All records are kept on file, and the screws can be placed in inventory or packaged and released to the customer.

There are really two levels of traceability worth distinguishing:

Finished product/process traceability

  • Manufacturing lot number
  • Raw material heat number
  • All manufacturing records
  • Special processes
  • Inspection records
  • Certifications
  • Shipment records

For aerospace, the second level is often what is meant when people talk about “complete traceability.”

Fill Out the Form