Laboratory Requirements

1. *ANS/ISO/IEC 17025   General Requirements for the Competence of Testing and Calibration Laboratories
2. *ANSI/NCSL Z540-1   Calibration Systems Requirements
3. *ISO 10012   Measurement Management Systems -Requirements for Measurement Processes and Measuring Equipment
4. *MIL I 45208   Inspection System Requirements

Federal Specification

1. *FF S 200   Set Screws: Hexagon Socket and Spline Socket, Headless

Dimensional Standards

1. *ASME/ANSI B18.3   Screw Dimensions
2. *ASME/ANSI B18.3.6M   Metric Series Socket Set Screws
3. *ASME/ANSI B18.6.2   Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws.
4. **Fastener Standards  Industrial Fastener Institute (IFI)

Threads Standards

1. *ASME/ANSI B1.1   Screw Thread Standards Inch Series
2. *ASME/ANSI B1.2   Gages and Gaging for Screw Threads
3. *ASME/ANSI B1.3M   Screw Thread Gaging Systems for Dimensional Acceptability
4. *ASME/ANSI B1.13M   Metric Screw Thread M Profile
5. *ASME/ANSI B1.16M   Gages and Gaging for Metric M Screw Threads
6. *FED STD H28/4   Controlled Radius Root Screw Threads, UNJ
7. *FED STD H28/6A   Gages and Gaging for Unified Screw Threads, UN & UNR
8. *FED STD H28/20A   Inspection Methods for Acceptability of Screw Threads
9. *FED STD H28/21B   Metric Screw Threads
10. *FED STD H28/22A   Gages & Gaging for Metric Screws
11. *MIL S 7742   Standard Screw Threads
12. *SAE AS8879   UNJ Screw Threads

Hardness, Microhardness and Torque Standards

1. *ASTM E3   Standard Guide for Prep. of Metallographic Specimens
2. *ASTM E18   Standard Test Method for Rockwell Hardness and Rockwell Superficial Hardness
3. *ASTM E140   Standard Hardness Conversion Tables for Metals.
4. *ASTM E92   Vicker's Hardness of Metallic Materials
5. *ASTM E384   Standard Test Method for Microindentation Hardness of Materials
6. *ASTM F880   Stainless Screws Torsional Strength Requirements
7. *ASTM F880M   Metric Stainless Screws - Torsional StrengthRequirements
8. *ASTM F912   Alloy Screws Torsional Strength Requirements
9. *ASTM F912M   Metric Alloy Screws - Torsional Strength Requirements
10. *AMS-6875A   Heat Treatment of Steel
11. *SAE J121   Decarburization in Hardened and Tempered Unified Threaded Fasteners

Sampling Standards

1. *ANSI/ASQC Z1.4   Sampling Procedures and Tables for Inspection by Attributes
2. *ASME/ANSI B18.18.2M   Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners
3. *ASTM F1470   Fastener Sampling for Specified Mechanical Properties and Performance Inspection.
4. **QAP-EQ001   Quality Assurance Provisions

Finish & Coating Standards

1. *AMS 2700E  Passivation Treatments for Corrosion-Resistant Steel
2. *AMS2759/2E Heat Treatment of Low-Alloy Steel Parts
3. *AMS-QQ-P-416  Plating Cadmium Electrodeposited
4. *ASTM B487  Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section.
5. *MIL C 13924  Coating Oxide Black for Ferrous Metal
6. *MIL STD 171  Finishing of Metal & Wood Surfaces

Material Standards

1. *ASTM A29/A29M  Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements
2. *ASTM A108  Standard Specification for Steel Bars, Carbon and Alloy, Cold Finished
3. *ASTM A304  Standard Specification for Steel Bars, Carbon and Alloy Steel Bars Subject to End-Quench Hardenability                 Requirements.
4. *ASTM A322  Standard Specification for Steel Bars, Alloy, Standard Grade
5. *ASTM A484A/A484M  Standard Specification for Stainless Steel Bars, Billets, and Forgings 
6. *Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
7. *ASTM A582/A 582M Standard Specification for Free-Machining Stainless Steel Bars

Miscellaneous Standards

1. *ANSI/NCSL Z540.2   U.S. Guide to the Expression of Uncertainty in Measurement
2. *ASME/ANSI B1.30   Standard Practice for Calculating and Rounding Dimensions
3. *ASTM A342/A342M   Permeability of Feebly Magnetic Materials
4. *ASTM DS 56   Metal & Alloys in the Unified Numbering System
5. *ASTM E29   Using Significant Digits in Test Data to Determine Conformance with Specifications.
6. *ASTM F788/F788M   Surface Discontinuities of Bolts, Screws and Studs, Inch and Metric Series
7. ***MIL STD 120   Gage Inspection
8. *NASM1312   Stress Durability
9. *SAE AS9100C  Quality Management Systems – Requirements for Aviation, Space and Defense Organizaions 
                           (Limited to paragraphs   7.2.1, 7.2.2, 7.2.3, 7.4.1, 7.4.2, 7.4.3, 8.5.2 & 8.5.3)

*Government Blue Print Drawings

NAS1081   Setscrew, Self Locking
AN565 per NASM565   Setscrew-Hexagon Socket, Various Point Styles, Alloy/Stainless Steels.
MS18063 throuh MS51982 per NASM18063 through NASM51982   Setscrew, Hexagon Socket, Various Point Styles, Alloy/Stainless Steels.

*Automatically updated by Document Engineering Co., Inc.
**Periodically checked for updates via internet.
***Discontinued no updating needed.